Commercial · Albuquerque, NM
Warehouse epoxy flooring has to handle forklifts, pallet jacks, impact, and chemical drips without turning into dust or delaminating. Elite Epoxy Albuquerque has served Albuquerque since 2016, installing and repairing industrial epoxy, urethane cement, and polyaspartic floor systems built for production schedules.
Prep is the job. We start with slab evaluation (moisture vapor emission, surface profile, cracks, and joint condition), then remove weak concrete, glue, curing compounds, and oils. Most warehouses need diamond grinding with HEPA dust control or steel shot blasting to reach an ICRI CSP 2-4 profile, followed by crack chasing and repair with epoxy paste or polyurea. For moisture issues, we install a vapor-mitigating epoxy primer and rebuild spalls with mortar so the coating bonds to sound concrete, not contaminants.
Local conditions matter in how warehouse epoxy flooring performs. Temperature swings, tire heat, and frequent washdowns can push standard epoxies past their comfort zone, so we select the right build: 100 percent solids epoxy for thickness and chemical resistance, urethane cement for thermal shock and wet areas, and polyaspartic or urethane topcoats for abrasion and UV stability. Finish options include smooth high-gloss for light reflectivity, orange-peel or broom-finish texture for traction, and broadcast quartz or aluminum oxide for loading docks and ramps. We also stripe traffic lanes, pedestrian paths, and staging zones with high-solids epoxy line paint and clear coat lock-in.
Operations teams choose us because we plan around uptime and safety, not just appearance. You get a written scope with coating type, dry film thickness targets (typically 12-30 mils depending on system), slip-resistance approach, and cure window, plus a realistic phasing plan for aisles, racks, and dock doors. Our crew is licensed and insured, uses calibrated mixing, batch tracking, and moisture testing, and keeps dust under control with industrial vacuums and containment so production areas stay workable.
Before we turn the space back over, we do a closing walkthrough with your supervisor to confirm adhesion, uniform coverage, cove or edge details if included, clean terminations at joints, and crisp striping. You receive care and cure instructions (foot traffic, forklift return-to-service timing, and chemical exposure limits), plus a maintenance plan for scrubbers, neutral cleaners, and spill response. If you called us for repair, we isolate the failure cause, remove the unsound coating, and tie the patch into surrounding areas so it wears as one floor instead of a weak spot.
The end result is warehouse epoxy flooring that controls dust, cleans faster, and resists ruts, chips, and chemical staining under daily traffic. Expect clear communication, jobsite safety, and documentation you can hand to facilities management. When you are ready, we provide a free written estimate and a schedule that matches your production needs.
Yes. We operate as a professional epoxy contractor and carry insurance, and we provide written estimates and a defined scope before work begins.
We typically diamond-grind for a consistent mechanical profile and stronger adhesion. Acid etching alone is not a substitute for proper surface profiling on most slabs.
Sometimes. We test adhesion and check for peeling, contamination, and incompatible coatings, then grind and recoat if the base is sound. If the old coating is failing, removal and a new system is the reliable option.
A UV-stable topcoat, commonly polyaspartic or aliphatic polyurethane, helps reduce ambering and chalking compared to epoxy exposed to direct sun.
Yes. We install vinyl flake broadcast systems in a range of blends and coverage levels, then lock it in with a clear topcoat in gloss or satin.
Warehouse epoxy flooring is a performance system, not paint. The right installation starts with concrete testing and mechanical surface prep, then matches primers, body coats, and topcoats to your traffic loads, chemicals, and cleaning routine. Elite Epoxy Albuquerque installs new systems and repairs failing floors for warehouses, distribution centers, light manufacturing, cold storage support areas, and loading docks across Albuquerque.
If your existing coating is peeling, blistering, or wearing through, the fix is rarely another thin coat. We identify the root cause, often oil contamination, poor surface profile, moisture vapor pressure, or incompatible products, then remove unsound material back to solid concrete. Repairs typically include crack and joint treatment, rebuild of spalls with epoxy mortar, and a tie-in plan that avoids weak edges so patched areas do not telegraph or pop under turning forklifts.
For new installs, we help you choose the right system thickness and chemistry. Many warehouses do well with a 2-coat to 3-coat 100 percent solids epoxy build with a urethane or polyaspartic topcoat for abrasion resistance and easier cleaning. Areas exposed to hot water, frequent washdowns, or aggressive chemicals often perform better with urethane cement. We can also add integral cove base, high-visibility striping, and designated pedestrian lanes to improve safety and organization.
Every project ends with a documented walkthrough and clear return-to-service guidance so your team knows when it is safe to stage pallets, run lifts, and resume cleaning. If you need warehouse epoxy flooring in Albuquerque, request a free written estimate and get a plan that protects uptime, improves durability, and keeps your floor looking professional.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Albuquerque. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
