Commercial · Albuquerque, NM
Medical epoxy flooring has to stay seamless, sanitary, and slip-controlled without shutting your clinic down longer than necessary. Elite Epoxy Albuquerque has served since 2016, installing and repairing epoxy systems for exam rooms, corridors, labs, and restrooms in Albuquerque.
Proper prep determines whether a medical epoxy floor lasts or starts peeling at seams and doorways. We begin with moisture testing (calcium chloride or in-situ RH as needed), then mechanically profile the slab with a dust-controlled diamond grinder (typically CSP 2-3 for thin-film epoxy, CSP 3-4 for thicker systems). Cracks and control joints are routed, cleaned, and repaired with epoxy gel, semi-rigid polyurea, or an epoxy mortar depending on movement and load. If the slab needs build, we install an epoxy slurry or mortar base and re-grind to remove high spots so rolling equipment tracks cleanly.
Clinics see constant disinfectant use, rolling loads, and wet cleaning, so the finish has to match the workflow. We install multi-coat medical epoxy flooring with 100 percent solids epoxy primers and body coats, then a chemical-resistant urethane or polyaspartic topcoat for stain and scratch control. Where slip resistance is required, we broadcast aluminum oxide or silica into the wear coat and tune traction for back-of-house wet areas versus front-of-house lobbies. Cove base and integral cove transitions can be added for easy mop-down, and we detail around floor drains, toilet flanges, and thresholds to keep the surface monolithic and easier to sanitize.
Albuquerque facilities choose us because we plan like a contractor and execute like a finish crew. You get clear written scopes, product data sheets, and a system matched to your use case, from light-duty exam rooms to heavier back-of-house storage and loading zones. We are licensed and insured, and we schedule around patient hours, noise limits, and infection-control needs, including contained grinding, HEPA dust management, and low-odor materials when the space must remain operational. When repairs are needed, we troubleshoot the cause (moisture vapor, contamination, coating incompatibility, or joint movement) and fix the substrate issues instead of just recoating.
Before turnover, we do a walkthrough with your point of contact and verify transitions, drains, and door clearances, then mark any punch items and resolve them fast. You receive care and cleaning guidance (approved detergents, scrubber pads, and cure timelines), plus documentation on the installed system so future maintenance stays compatible. We can stripe walk paths, mark rooms, and add safety colors with epoxy pigmented coats or durable urethane striping. If you need phased work, we can divide the clinic into zones to keep access open while protecting fresh coatings during cure.
Yes. We operate as a professional epoxy contractor and carry insurance, and we provide written estimates and a defined scope before work begins.
We typically diamond-grind for a consistent mechanical profile and stronger adhesion. Acid etching alone is not a substitute for proper surface profiling on most slabs.
Sometimes. We test adhesion and check for peeling, contamination, and incompatible coatings, then grind and recoat if the base is sound. If the old coating is failing, removal and a new system is the reliable option.
A UV-stable topcoat, commonly polyaspartic or aliphatic polyurethane, helps reduce ambering and chalking compared to epoxy exposed to direct sun.
Yes. We install vinyl flake broadcast systems in a range of blends and coverage levels, then lock it in with a clear topcoat in gloss or satin.
Medical epoxy flooring is built for hygiene, heavy foot traffic, rolling loads, and routine cleaning with disinfectants. In healthcare spaces, a seamless floor helps reduce places where dirt, moisture, and bacteria can hide, and it makes day-to-day maintenance faster. Elite Epoxy Albuquerque installs and repairs epoxy flooring systems for medical clinics, dental offices, urgent care facilities, imaging centers, labs, and restrooms, with options for slip resistance, chemical resistance, and easy-to-clean cove base details.
A medical clinic floor fails when prep is skipped or the system is mismatched to cleaning chemicals and traffic. Our process starts with concrete evaluation, moisture testing, and mechanical surface preparation to the right Concrete Surface Profile (CSP). We repair cracks, spalls, and joints, then install a primer and body coat designed for adhesion and build. For areas that see frequent mopping, disinfectants, and scuffing from carts, we typically recommend a 100 percent solids epoxy base with a chemical-resistant urethane or polyaspartic topcoat for better stain resistance and easier upkeep.
For clinics that need additional safety, we can broadcast aluminum oxide into the wear coat for dependable traction while keeping the floor easy to clean. We also handle cove base transitions and detail work around drains, toilets, and thresholds to minimize seams and edge failures. If you already have a failing coating, we diagnose the cause, including moisture vapor transmission, surface contamination, or incompatible layers, and recommend the repair approach that actually solves the problem.
If you are planning a remodel or need quick repairs, we can schedule off-hours and phase the work by rooms or corridors to limit disruption. Expect a written scope, clear cure timelines, and cleaning guidance so your staff can protect the finish from day one. For medical epoxy flooring in Albuquerque, contact Elite Epoxy Albuquerque for a free written estimate and a plan that fits your facility.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Albuquerque. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
