Residential · Albuquerque, NM
Flake epoxy flooring gives garages, shops, and retail floors a clean, slip-resistant surface that hides dirt and wear better than solid-color epoxy. Elite Epoxy Albuquerque has served since 2016, installing and repairing full-flake and partial-broadcast systems with clear topcoats for long-term protection in Albuquerque.
Prep decides whether a flake floor lasts, so we start with concrete testing and mechanical profiling. We diamond-grind with HEPA dust control, remove tire residue, oil, curing compounds, and old coatings, then address cracks and spalls with epoxy mortar or polyurea crack filler as the slab allows. After masking and joint planning, we apply a moisture-tolerant epoxy primer when needed, followed by a pigmented epoxy base coat built to accept the flake broadcast without dry spots or roller marks.
Albuquerque slabs can swing from hot, dry summers to cold snaps, so cure times, open time, and topcoat choice matter. We control film build with a notched squeegee and back-roll technique, then broadcast vinyl color flakes to refusal (full flake) or to a specified coverage rate for a lighter look. Once cured, we scrape and vacuum, then lock everything in with a clear topcoat, typically a UV-stable polyaspartic or aliphatic polyurethane depending on exposure, chemical use, and desired gloss. For traction, we can add aluminum oxide or polymer grit to meet the slip-resistance needs of garages, entries, restrooms, and service bays.
Customers choose us because we install flake epoxy flooring like a system, not a single coat. We bring the right equipment and controls, including industrial grinders, edge tools, calibrated mixing, and moisture checks so the coating bonds instead of peeling. You get clear options on broadcast density, color blends, cove base details, and topcoat sheen, plus honest guidance on when repairs, a recoat, or a full removal is the correct fix.
At the end of the job we do a walkthrough, check edges, transitions, and drain details, and confirm the surface is consistent, sealed, and ready for service. You receive care and cleaning guidelines, cure and return-to-service timing, and a written scope that lists the primer, base coat, flake size and blend, and clear coat used. If you called for repair, we document the failure source we found (moisture, contamination, delamination, hot-tire pickup, or impact damage) and what we did to correct it so the next floor performs.
Yes. We operate as a professional epoxy contractor and carry insurance, and we provide written estimates and a defined scope before work begins.
We typically diamond-grind for a consistent mechanical profile and stronger adhesion. Acid etching alone is not a substitute for proper surface profiling on most slabs.
Sometimes. We test adhesion and check for peeling, contamination, and incompatible coatings, then grind and recoat if the base is sound. If the old coating is failing, removal and a new system is the reliable option.
A UV-stable topcoat, commonly polyaspartic or aliphatic polyurethane, helps reduce ambering and chalking compared to epoxy exposed to direct sun.
Yes. We install vinyl flake broadcast systems in a range of blends and coverage levels, then lock it in with a clear topcoat in gloss or satin.
Flake epoxy flooring is a broadcast system that combines an epoxy base coat, decorative vinyl flakes, and a clear protective topcoat to create a durable, easy-to-clean surface for garages, warehouses, retail, and commercial back-of-house areas. Done right, it is more than a cosmetic upgrade. It is a bonded coating system built on proper concrete profiling, correct film thickness, and a topcoat chosen for UV, abrasion, and chemical resistance. Elite Epoxy Albuquerque installs new flake floors and fixes peeling, bubbling, and worn topcoats by diagnosing the cause first, then rebuilding the system from the slab up when needed.
A quality flake epoxy flooring install starts with the concrete. We mechanically grind to the right surface profile, clean thoroughly, and address joints, cracks, and spalls so the coating does not telegraph defects. Where moisture vapor is a risk, we discuss moisture-mitigating primers and realistic expectations for older slabs. From there, we apply an epoxy base coat and broadcast flake to the specified coverage, then scrape and vacuum to remove loose material before sealing with a clear topcoat.
For homes, the goal is usually a garage floor that resists tire marks, road salts, and household chemicals while staying easy to sweep and mop. For businesses, we focus on abrasion resistance, cleanability, and traction, with options like aluminum oxide in the clear coat and a satin or gloss finish depending on lighting and safety needs. We also build details like clean transitions at doorways and around drains so the floor is easier to maintain.
If you need flake epoxy flooring repair, we can recoat a dull or scratched clear coat, patch isolated damage, or remove failed coatings and reinstall the full system. You will get a clear written plan, product selections that fit the space, and a straightforward schedule so your garage or facility can get back to normal with minimal downtime.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Albuquerque. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
