Elite Epoxy Albuquerque has served Albuquerque since 2016, installing epoxy floor coatings and resinous systems that protect concrete and make maintenance easy. We specialize in full-garage epoxy systems, commercial shop floors, polyaspartic topcoats, concrete crack repair, and moisture-mitigation primers. You get a free written estimate, thorough surface prep, and a clean, dependable finish built for long-term wear.
We install 100 percent solids epoxy systems, decorative flake broadcasts, and quartz flooring with UV-stable polyaspartic or aliphatic urethane topcoats. Typical builds land around 15-30 mils total thickness depending on system and texture.
Concrete is profiled with diamond grinding and HEPA dust control, then primed and built to match the slab and the traffic. We address oil contamination, spalling, and control joints so the coating bonds and wears evenly instead of failing at weak spots.
Each job starts with moisture-risk awareness, crack mapping, and a written plan for primer, build coat, and topcoat. We mask walls, protect door tracks and base plates, and maintain wet-edge control for uniform color and gloss.
Fast-cure polyaspartic options can speed return-to-service when schedules are tight, while thicker epoxy builds add body for shops and heavy use. After curing, we walk the floor with you and provide care guidance on pH-neutral cleaning, grit control, and when to recoat the clear layer.
Our Services
A durable epoxy garage floor starts with correct concrete prep, not a quick roll-on kit. Elite Epoxy Albuquerque installs and repairs garage floor epoxy systems that resist hot-tire pickup, oil, salt, and abrasion, with clean transitions at doors and stem walls.
Learn More
For true showroom depth and movement, metallic epoxy flooring needs more than a topcoat, it needs a flat, properly built system. Elite Epoxy Albuquerque has served Albuquerque since 2016, installing and repairing metallic epoxy floors for garages, retail, offices, and lobbies with controlled swirls, consistent gloss, and durable clear coats.
Learn More
Flake epoxy flooring gives garages, shops, and retail floors a clean, slip-resistant surface that hides dirt and wear better than solid-color epoxy. Elite Epoxy Albuquerque has served since 2016, installing and repairing full-flake and partial-broadcast systems with clear topcoats for long-term protection in Albuquerque.
Learn More
A basement slab has different risks than a garage, moisture vapor, cool temperatures, and old patchwork concrete. Elite Epoxy Albuquerque has served Albuquerque since 2016, installing and repairing epoxy basement floor systems built for clean, bright, easy-to-maintain space.
Learn More
Laundry rooms punish concrete with detergent spills, hot water leaks, and constant foot traffic, so a standard paint coating fails fast. Elite Epoxy Albuquerque has served Albuquerque since 2016, installing and repairing epoxy laundry room floor systems that seal the slab and clean up easily.
Learn More
Mudrooms and entryways take the worst abuse, wet shoes, grit, pet traffic, and constant cleaning. Elite Epoxy Albuquerque installs and repairs epoxy mudroom floor systems that stay easy to mop, resist stains, and look sharp in Albuquerque homes and commercial entries.
Learn MoreTell us the space type (garage, warehouse, patio, kitchen) and your performance needs, like hot-tire pickup resistance, chemical splash, or non-slip texture.
We inspect concrete condition, previous coatings, cracks, and moisture risk, then outline prep steps, coating system, color or flake, and a realistic schedule.
We prep, coat, and protect adjacent walls and doors, then verify coverage and finish consistency. After cure, we review care instructions, return-to-service timing, and warranty terms in writing.
Why Albuquerque Chooses Us
Experienced, licensed epoxy contractors delivering durable results for every home and business across Albuquerque.
Work is performed by an epoxy contractor that carries proper insurance and provides a clear, written scope. We use documented product systems (primer, build coat, topcoat) instead of single-coat paint.
We diamond-grind concrete with HEPA dust control, detail edges, and treat oil spots before coating. Joints and cracks get repaired with epoxy crack filler or polyurea to reduce telegraphing.
Choose from solid color, vinyl flake broadcast, or quartz textures with glossy or satin urethane or polyaspartic topcoats. We explain slip-resistance additives, chemical resistance, and cure-time tradeoffs before you decide.
Elite Epoxy Albuquerque serves Albuquerque and 8 surrounding communities including Los Ranchos de Albuquerque, Corrales, Rio Rancho. We typically respond to new project requests within one business day and can often schedule estimates the same week.
Elite Epoxy Albuquerque installs resinous flooring systems for homes and businesses, with an emphasis on correct prep, compatible product stacks, and predictable cure schedules.
Our work commonly includes diamond grinding, crack and spall repair, epoxy primers, 100 percent solids epoxy build coats, full flake broadcast systems, and polyaspartic or polyurethane topcoats for UV and abrasion resistance. When conditions call for it, we add moisture-mitigation primer or adjust the system to match the slab and the use case.
Albuquerque’s dry climate, strong sun, and windblown grit are tough on bare concrete and weak coatings. We use UV-stable topcoats (often polyaspartic or aliphatic urethane) to reduce ambering and chalking on sunlit entries and exterior-adjacent slabs.
Hot tires, de-icing salts, and garage chemicals like brake fluid or battery acid can stain or soften low-grade coatings. We specify chemical-resistant resin systems, add slip-resistant media where traction matters, and focus on tight adhesion through mechanical profiling (diamond grind) instead of acid etching.
For homeowners, common projects include garage floor coatings, workshops, home gyms, basements, patios, and covered porches. Decorative options include solid epoxy, vinyl flake broadcast (light to full coverage), and quartz for a more textured, slip-resistant surface.
For commercial and industrial spaces, we coat auto shops, warehouses, storage rooms, showrooms, restaurants (back-of-house), medical and veterinary spaces, and light manufacturing areas. Systems can be tailored for forklift traffic, abrasion, and cleanability, with cove base options, line striping, and fast-return-to-service topcoats when downtime is limited.
We serve Albuquerque and the surrounding metro for residential and commercial epoxy coating work, including Rio Rancho, Corrales, Bernalillo, Los Lunas, Belen, and East Mountain communities as scheduling allows.
If you are outside the core area, send the address and a few photos of the slab and we will confirm travel availability and provide a realistic timeline. Larger commercial projects and multi-bay facilities can often justify extended service ranges.
No. Many “epoxy paints” are thin, water-based coatings that sit on the surface and wear quickly. A real epoxy floor system uses mechanical prep plus an epoxy primer and higher-build epoxy layers, usually finished with a polyurethane or polyaspartic topcoat for abrasion and stain resistance.
The biggest causes are poor surface prep, moisture vapor coming through the slab, or using a soft coating without a protective topcoat. Diamond grinding to a proper concrete profile, using the right primer, and adding a durable topcoat greatly reduces peeling and tire marks.
Cracks should be repaired, but concrete can move and some cracks may telegraph over time. We route and fill cracks with epoxy or polyurea repair materials and discuss which cracks are structural vs. cosmetic so expectations are clear before coating.
A high-gloss epoxy can be slick with water, especially in entry areas. We can add anti-slip aggregate to the clear coat, use a quartz broadcast, or choose a satin topcoat to improve traction while keeping the floor easy to clean.
Return-to-service depends on the system, temperature, and humidity. Many polyaspartic topcoats allow faster return, while thicker epoxy builds may need more cure time before parking; we provide a written cure schedule for foot traffic and vehicles.
Use a soft broom or dust mop for grit, then clean with a pH-neutral cleaner and a microfiber mop. Avoid harsh acids and stiff wire brushes, and wipe up solvents or battery acid quickly to protect the topcoat.
Yes. We operate as a professional epoxy contractor and carry insurance, and we provide written estimates and a defined scope before work begins.
We typically diamond-grind for a consistent mechanical profile and stronger adhesion. Acid etching alone is not a substitute for proper surface profiling on most slabs.
Sometimes. We test adhesion and check for peeling, contamination, and incompatible coatings, then grind and recoat if the base is sound. If the old coating is failing, removal and a new system is the reliable option.
A UV-stable topcoat, commonly polyaspartic or aliphatic polyurethane, helps reduce ambering and chalking compared to epoxy exposed to direct sun.
Yes. We install vinyl flake broadcast systems in a range of blends and coverage levels, then lock it in with a clear topcoat in gloss or satin.
If you're planning a epoxy project in Albuquerque, working with a dependable local contractor makes all the difference. We provide residential and commercial epoxy services focused on proper preparation, clear communication, and long-term performance. Whether you need a new installation or repairs to existing epoxy, our team is ready to help. Each project is evaluated based on site conditions, usage needs, and local requirements to ensure dependable results. If you're ready to discuss your project or need more information, reach out today and speak directly with our team.
